iTrans DP-R-22 Dante 2CH Analog Audio Encoder (Rx) with PoE, phoenix port

Escribe una opinión
[Contacte con nosotros para precio]
iTrans DP-R-22
Disponibilidad: En espera

The iTrans DP-R-22 is an audio receiver based on the Dante Ultimo solution. It decodes the signal from the encoder, and converts I2S audio signal to analog signal through DAC module to output. This product transmits signals through Dante network, supporting AES67 RTP audio transmission. It also supports 5-level gain adjustment and PoE power supply

Features
  • Analog audio output supports balanced/unbalanced audio output (unbalanced access to "+" and "GND")
  • Audio sampling rate supports 44.1KHz, 48KHz, 88.2KHz and 96KHz, @16bit/24bit/32bit
  • Dante solution supports AES67 RTP audio transmission
  • Audio output supports 5-level gain adjustment: +18dBu, +4dBu, 0dBu, 0dBV and -10dBV
  • Support DC 12V power supply and PoE power supply (IEEE802.3af Class 1)
Brand:
Infobit
Product Type:
Analog Audio Decoder

Specifications

Cable Length:
100m
HDMI Embedded Audio Channels:
PCM 2.0@16bit/24bit/32bit, 44.1kHz/48kHz/88.2kHz/96kHz
Maximum Operating Temperature:
+40°C
Recording File Format:
PCM 2.0 44.1kHz/48kHz/96kHz, up to 24bit
Audio Decoding Type:
PCM 2.0@16bit/24bit/32bit, 44.1kHz/48kHz/88.2kHz/96kHz
Special Features:
Dante Solution Supports AES67 RTP Audio Transmission
Control Interface Type:
1xRJ45
User Interface Indicator Type:
LED
Humidity:
20 to 90%
Minimum Operating Temperature:
0°C
Includes:
1×iTrans DP-R-22, 1×6Pin-3.81mm Phoenix Connector, 1×2pin-3.81mm Phoenix Connector, 1×User Manual

Performance

Bit Rate:
24bit
Audio Encoding and Bitrate:
PCM 2.0@16bit/24bit/32bit, 44.1kHz/48kHz/88.2kHz/96kHz

Inputs and Ports

Audio Input Type:
PCM 2.0@16bit/24bit/32bit, 44.1kHz/48kHz/88.2kHz/96kHz
Input Port Type:
1×Dante
Output Port Type:
2×Audio
Interface Type:
1xRJ45

Connectivity

Network Switch Type:
100/1000M Network Switch

Power

Current Rating:
1A
Power Source Type:
PoE, External Supply

Dimensions

Width:
13cm
Depth:
7cm
Height:
2.6cm
Weight:
230g

Other

Voltage Rating:
12V DC
Standards Met:
IEEE802.3af Class 1
Warranty:
3 years

iTrans DP-R-22 1 (iTrans-DP-R-22-User-Manual_V1.0-1.pdf, 265 Kb) [Descargar]

No se encontraron opiniones