KDS-8F Zero Latency 4K HDR SDVoE Video Streaming Transceiver, 1 SFP+ Fiber, 1 1GbE Ethernet/1 RS-232, 3 USB/1 USB, 12V ac, 1 A

KDS−8F is a high−performance, zero latency, 4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over single−mode and multi−mode optical fiber. KDS−8F can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI or DisplayPort input along with IR, RS−232, analog audio and USB, over an IP network. As a decoder, it receives the encoded signal and decodes it for output.

• High–Performance Video Streaming Transceiver — Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression
• Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms
• Streamlined Management and Configuration — Kramer KDS–8–MNGR device (sold separately) provides a central point of management and enables creating multiple virtual matrices, video walls and multi–view configurations. In addition, KDS–8–MNGR supports preset configurations that can be activated using Kramer Control
• HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support
• High–Speed 10G Network Switch — Managed switch provides: multicast, jumbo frames, IGMP snooping and fast leave
• Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal
• Bi–directional IR over IP — Control an IR device located on the decoder side from the encoder and vice versa
• Bi–directional RS–232 over IP — Control a serial device located on the decoder side from the encoder and vice versa
• Video Wall Support
• Multiview Support
• Easy, Cost–Effective Maintenance — LED indicators for main power, Tx/Rx mode setting, HDMI video source detection, and Tx and Rx transmission enable easy local maintenance and troubleshooting
• Simple System Management — Remote system management support to enable quick and efficient remote system and device life–cycle management