Vocia VA-2060 Digital Networked Two-Channel Amplifier
Por favor, regístrese para que podamos notificarle una respuesta
The VA-2060 is a digital networked two-channel amplifier for use in Vocia systems. It is capable of delivering continuous audio power at 60 Watts RMS per channel. The VA-2060 is CobraNet® enabled for audio and control with dynamic use of bundles. Two RJ-45 connectors on the rear panel provide redundant CobraNet connectivity to the Vocia network. The on-board DSP provides comprehensive fixed-chain, digital signal processing within the device. In addition, emergency messages are stored in local non-volatile memory. Page active relay outputs provide a contact closure per channel when paging is active on the channel. The amplifier offers low impedance and constant voltage outputs. The VA-2060 also has comprehensive failover capability with device-to-device and channel-to-channel failover.
Features- Two channels of 30W RMS per channel
- Transformer coupled outputs, low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
- Supports Page Active Relay (PAR), ELD-1 and ANC-1
- Local non-volatile storage of emergency messages
- Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization and output sensitivity
- LED status and signal indication
- Ground fault detection
- CobraNet audio/control with dynamic use of available bundles
- Rotary switches for device identification
- Rack mountable (2RU)
- EN 54-16 certified, CE marked, and RoHS compliant
- Covered by Biamp Systems’ 5-year warranty
Specifications
Performance
Inputs and Ports
Power
Dimensions
Other
No se encontraron opiniones