Zaloguj się
EnglishEspañolČeštinaFrançaisDeutsch
EnglishEspañolČeštinaFrançaisDeutsch

Vocia VA-4030 Digital Networked Four-Channel Amplifier, LED Indicator

Napisz recenzję
[Skontaktuj się z nami w sprawie ceny]
Vocia VA-4030
Dostępność: Na zamówienie
Zaloguj się, aby zobaczyć cenę

The VA-4030 is a digital networked four-channel amplifier for use in Vocia systems. It is capable of delivering continuous audio power at 30 Watts RMS per channel. The VA-4030 is CobraNet® enabled for audio and control with dynamic use of bundles. Two RJ-45 connectors on the rear panel provide redundant CobraNet connectivity to the Vocia network. The on-board DSP provides comprehensive fixed-chain, digital signal processing within the device. In addition, emergency messages are stored in local nonvolatile memory. Page active relay outputs provide a contact closure per channel when paging is active on the channel. The amplifier offers low impedance and constant voltage outputs. The VA-4030 also has comprehensive failover capability with device-to-device, all-to-one, and channel-to-channel failover.

Features
  • Four channels of 30W RMS per channel
  • Transformer coupled outputs, low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
  • Supports Page Active Relay (PAR), ELD-1 and ANC-1
  • Local non-volatile storage of emergency messages
  • Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization and output sensitivity
  • LED status and signal indication
  • Ground fault detection
  • CobraNet audio/control with dynamic use of available bundles
  • Rotary switches for device identification
  • Rack mountable (2RU)
  • EN 54-16 certified, CE marked, and RoHS compliant
  • Covered by Biamp Systems’ 5-year warranty
Marka:
Biamp
Typ produktu:
Cyfrowy czterokanałowy wzmacniacz sieciowy

Parametry podstawowe

Maksymalna temperatura robocza:
+40°C
Funkcje specjalne:
Four Channels of 30WRMS per Channel, Rack Mountable (2RU)
Typ wskaźnika:
LED
Wilgotność:
0 to 95% (Non-Condensing)
Minimalna temperatura robocza:
-5°C

Wydajność

Stosunek sygnału do szumu:
> 88dB
Częstotliwość:
50/60Hz
Rating impedancji wejściowej:
4Ω, 8Ω

Wejścia i porty

Rodzaj złącza B:
RJ45
Typ wejścia:
20bits, 48kHz, 5-1/3ms (Fixed)

Moc

Napięcie wejściowe:
100 to 240V AC

Wymiary

Szerokość:
48.3cm
Głębokość:
36.1cm
Wysokość:
8.2cm
Waga:
11.9kg

Inne

Certyfikacje, standardy:
EN 54-16 Certified, FCC Part 15B (USA), CE (Europe), RCM (Australia), EAC (Eurasian Customs Union), RoHS Directive (Europe), RINA (Italy), EN 60849, AS 60849 Verified

Vocia VA-4030 1 (biamp_data_sheet_vocia_va-4030_oct18.pdf, 693 Kb) [Pobierz]

Nie znaleziono opinii