Vocia VA-4300CV Digital Networked Four-Channel Amplifier, 300 W
Veuillez vous connecter afin que nous puissions vous informer d'une réponse
The Vocia® VA-4300CV is a digital networked four-channel amplifier for use in Vocia systems. It is capable of delivering audio power at 300 Watts per channel. The VA-4300CV is CobraNet® enabled for audio and control with dynamic use of bundles. Two RJ-45 connectors on the rear panel provide redundant CobraNet connectivity to the Vocia network. The onboard DSP provides comprehensive fixed-chain, digital signal processing within the device. In addition, emergency messages are stored in local non-volatile memory. Page active relay outputs provide a contact closure per channel when paging is active on the channel. The amplifier also has comprehensive failover capability with device-to-device and channel-to-channel failover.
Features- Page active relay
- Comprehensive failover
- Extended audio delay (up to 32 seconds per channel)
- CobraNet audio/control with dynamic use of available bundles
- Flexible line monitoring
- Dual Ethernet ports for network redundancy
- Dual Ethernet ports for network redundancy
- Dual power inputs (100-240V and 2x 48VDC)
- 2RU Rack mountable
Brand:
Biamp
Product Type:
Digital Networked Four-Channel Amplifier
Specifications
Maximum Operating Temperature:
+42°C
Special Features:
Four Channels of 300W per Channel, Flexible Line Monitoring, Page Active Relay
Indicator Type:
LED
Humidity:
0 to 95% (Non-Condensing)
Minimum Operating Temperature:
-8°C
Includes:
Volume Control, Filters, Compressor/Limiting, Delay, Speaker Equalization and Output Sensitivity
Performance
Signal-to-Noise Ratio:
>100dB
Frequency Rating:
50/60Hz
Inputs and Ports
Connector Type:
RJ45
Input Type:
CobraNet 20bits, 48kHz, 5-1/3ms (Fixed)
Power
Input Voltage:
100 to 240V AC
Dimensions
Width:
48.3cm
Depth:
44.4cm
Height:
8.8cm
Weight:
10.1kg
Other
Standards Met:
EN 54-16 Certified, FCC Part 15B (USA), CE (Europe), RCM (Australia), RoHS Directive (Europe)
Aucun avis trouvé