CX702 Power Amplifier, 2 channels, 425 W/ch@8Ω, 700 W/ch@4Ω, 1200 W/ch@2Ω, Class-AB
Veuillez vous connecter afin que nous puissions vous informer d'une réponse
Amplifier 425W / 8 ohms, 700W / 4 ohms, 1200W / 2 Ohms 2U. The QSC CX 702 can also be used in bridge mode: 850W / 16 ohms, 1500W / 8 ohms, 2400W / 4 ohms.
Features- QSC CX702
- 2U Power Amplifier In stereo mode, 20 Hz 20 kHz, 0.05% THD: 425W / 8 ohms, 700W / 4 ohms, 1200W / 2 ohms at 1 kHz, 1% THD
- Bridged mono mode, 20 Hz 20 kHz, 0.1% THD: 850W / 16 ohms, 1500W / 8 ohms, 2400W / 4 ohms at 1 kHz, 1% THD
- Powerwave supply: reliability, low noise, reduced weight, high instantaneous power
- Versatility: optimized design for all types of fixed installations
- No transient current during startup: protection of pregnant
- Data port (HD 15): remote control of a QSC control system configuration via
- PC Class H (from the CX 702): very low distortion and high dynamic performance
- Only 2U 19 "rack: minimum space
- Compact amplification racks. Forced ventilation: optimum heat evacuation; detachable fan Whisper Multicoverage: sophisticated circuitry protecting and contributing to the reliability of the amp and speakers
- Connectors: XLR inputs and Eurostyle; outputs on terminal block Privacy settings: gains notched plate with safety avoiding any accidental action
- Common Specifications Series CX: Distortion: < 0.02% Frequency response: 20Hz 20kHz +/ 0.2dB Factor amortization: > 500
- Impedance Input: 6Kohms asymmetric, symmetric 12Kohms
- Connectors Inputs: XLR, Jack 6.35mm and buildout block
- Eurostyles protected screw terminal, Data Port (HD 15)
- Controls: on / off, channel 1 Gain / channel2, Switch limiter and filter (33Hz or 75Hz) per channel, stereo / parallel / bridged Cooling: Variable speed fan, high efficiency radiator, horizontal cooling air flow (from the back to the front)
- Circuit Protection: short circuit, thermal, open circuit, ultrasound, high frequency, stable reactive or asymmetric load, load protection muting on / off, DC Power supply: 120 / 240V, 50 / 60Hz Dimensions: 19 ", 2U, 35,6cm Weight: 9,5kg
- Signal / noise ratio 106dBA Sensitivity (8ohms) 1,16V RMS Class H output stage high efficiency Gain 34dB
Brand:
QSC Systems
Product Type:
Power Amplifier
Specifications
Number of Channels:
Special Features:
Barrier Strip Output Connector, Variable Speed Fan for Low Noise
Power Rating:
425W@8Ω, 700W@4Ω, 1200W@2Ω, 1500W@8Ω, 2400W@4Ω
Performance
Amplifier Class:
Class AB
Signal-to-Noise Ratio:
>-106dB
Frequency Rating:
20Hz to 20kHz@±0.2dB
Input Impedance Rating:
12kΩ (Balanced), 6kΩ (Unbalanced)
Input Sensitivity:
1.16VRMS@8Ω
Voltage Gain:
34dB
Dimensions
Width:
48.3cm
Depth:
35.6cm
Height:
8.9cm
Weight:
9.5kg
Aucun avis trouvé