VB-TILTW Tilting Bracket, For VERIS 2 Installation Loudspeaker
Zaloguj się, abyśmy mogli powiadomić Cię o odpowiedzi
The VB-TILT is intended to be a versatile building block allowing the installer to develop and configure custom mounting solutions to suit the needs of varied applications. It can be used to hang and aim single cabinets from an overhead suspension point or to hang smaller downfill cabinets underneath main loudspeakers or loudspeaker clusters. It is strongly recommended that the VB-TILT bracket be used in conjunction with a VERIS 2 horizontal mounting yoke or CMKIT ceiling mount kit as listed in Table 1. All VERIS 2 yokes are designed to accept the VB-TILT bracket and provide a wide range of aiming and tilting options. The VB-TILT bracket attaches directly to the yoke, permitting one loudspeaker enclosure to be angled in relation to another in two axes. It is also possible to mount the VB-TILT bracket directly to an enclosure rigging point on large VERIS 2 models V2-12, V2-15, V2-32 and V2-35. However, caution must be taken not to place undue torque on the fitting or to exceed the single point working load limit. Each enclosure rigging point is rated at 100 lbs working load limit (WLL) with a 10:1 safety ratio.
Features- Allows for precise angling of a VERIS2 loudspeaker
- Two-part rotational device that can be used to fasten one enclosure to another
- Available in black or white
- Provides a high degree of safety for supporting the loudspeaker enclosure
Parametry podstawowe
Nie znaleziono opinii