VB-VST Versatilt Mounting Bracket, Black, Steel, For VERIS 2 Installation Series Loudspeaker

Napisz recenzję
[Skontaktuj się z nami w sprawie ceny]
VB-VST
Dostępność: Na zamówienie

The VB-TILT is intended to be a versatile building block allowing the installer to develop and configure custom mounting solutions to suit the needs of varied applications. It can be used to hang and aim single cabinets from an overhead suspension point or to hang smaller downfill cabinets underneath main loudspeakers or loudspeaker clusters. It is strongly recommended that the VB-TILT bracket be used in conjunction with a VERIS 2 horizontal mounting yoke or CMKIT ceiling mount kit as listed in Table 1. All VERIS 2 yokes are designed to accept the VB-TILT bracket and provide a wide range of aiming and tilting options. The VB-TILT bracket attaches directly to the yoke, permitting one loudspeaker enclosure to be angled in relation to another in two axes. It is also possible to mount the VB-TILT bracket directly to an enclosure rigging point on large VERIS 2 models V2-12, V2-15, V2-32 and V2-35. However, caution must be taken not to place undue torque on the fitting or to exceed the single point working load limit. Each enclosure rigging point is rated at 100 lbs working load limit (WLL) with a 10:1 safety ratio.

Marka:
Biamp
Typ produktu:
Uchwyt montażowy Versatilt

Parametry podstawowe

Kolor:
Black
Do użycia z:
VERIS 2 Installation Series Loudspeaker
Wykońćzenie:
Powder-Coated
Materiał:
Steel
Zawiera:
(1) Rotational Bracket, (1) Suspension Bracket, (1) Ceiling Mount Bracket, (1) Cabinet Hang Bracket, (1) M12 60mm Full Thread Bolt, (3) M12 Hex Nut, (3) M12 Flat Washer, (2) M12 Split Lock Washer, (4) M10 30mm Bolt, (6) M10 Flat Washer, (4) M10 Split Lock

Wymiary

Waga:
3.2kg

Inne

Certyfikacje, standardy:
TAA Compliant

VB-VST 1 (biamp_accessory_instruction_sheet_vb-vst.pdf, 158 Kb) [Pobierz]

Nie znaleziono opinii