Audio Signal Management

102MX
The 102MX is a high-performance 2-channel stereo audio mixer for line level and mic level audio signals. It mixes one line level input with either a microphone or a second line level input and produces a mixed audio output signal. Features S/N Ratio - 69dB Level (Gain) Control - Line...
BrandKramer Product TypeStereo Audio Mixer
Sign up
21875
Available:Backorder
Add to Project
102XL
The 102xl is a high-performance 2-channel mono audio mixer for balanced line level and mic level mono audio signals. The unit mixes two mono inputs and produces a mixed audio output signal. Features S/N Ratio - 91.5dB (line level), 62.5dB (mic level) Line or Mic Level - Input...
BrandKramer Product TypeBalanced Mono Audio Mixer
Sign up
35837
Available:Backorder
Add to Project
DPA-102PM
The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. Atlas DPA amplifiers can be used right out of the box as traditional power amplifiers requiring no...
BrandAtlas IED Product TypePower Amplifier
Sign up
60115
Available:Backorder
Add to Project
2211036-02
Extend Line level Stereo Audio signals over Category 5/5e/6 cable up to 2000 feet. 2211036-02 – a set of devices for transmitting a stereo audio signal over twisted pair cable, including a transmitter and receiver. The devices allow you to transmit stereo audio over a standard category...
BrandtvONE Product TypeAudio Extender
Sign up
15515
Available:Backorder
Add to Project
482XL
The 482xl is a high-performance audio transcoder for balanced and unbalanced stereo audio signals. It simultaneously converts balanced stereo signals to unbalanced stereo audio and unbalanced stereo audio signals to balanced stereo audio. Features Bidirectional Format Conversion...
BrandKramer Product TypeBalanced/Unbalanced Stereo Audio Transcoder
Sign up
26529
Available:Backorder
Add to Project
900N
The 900N is a high−performance power amplifier for balanced or unbalanced stereo audio signals. Either input can deliver a speaker output of 10 watts RMS power per channel into a 4Ω load. Features High Efficiency — Class D operation. S/N Ratio — 55dB. Controls —...
BrandKramer Product TypeStereo Power Amplifier
Sign up
21409
Available:Backorder
Add to Project
900XL
The 900xl is a high−performance power amplifier for line level stereo audio signals. The unit accepts unbalanced audio signals on either of two RCA or 3.5mm connectors and delivers a speaker output of 10 watts RMS per channel into a 4Ω load. Features High Efficiency — Class D...
BrandKramer Product TypeStereo Power Amplifier
Sign up
32114
Available:Backorder
Add to Project
907
The 907 is a high−performance power amplifier for line−level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and delivers 40 watts per channel into an 8Ω load. Features High Efficiency — Class D operation. Controls — Volume...
BrandKramer Product TypeStereo Power Amplifier
Sign up
48404
Available:Backorder
Add to Project
907XL
The 907xl is a high−performance power amplifier for line−level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an unbalanced stereo signal on RCA connectors. It delivers 40 watts per channel into an 8Ω load. Features High Efficiency...
BrandKramer Product TypeStereo Power Amplifier/Mixer
Sign up
45146
Available:Backorder
Add to Project
A 100
A100 2-channel power amplifiers: 100W rated power per channel at 4Ω.  Screw terminal speaker connectors and balanced Phoenix input connectors.  Ultra slim body, fan cooling system, bridge mode selector.
BrandAMC Product TypePower Amplifier
Sign up
26800
Available:Backorder
Add to Project
A 200
A200 2-channel power amplifiers: 200W rated power per channel at 4Ω.  Screw terminal speaker connectors and balanced Phoenix input connectors.  Ultra slim body, fan cooling system, bridge mode selector
BrandAMC Product TypePower Amplifier
Sign up
29600
Available:Backorder
Add to Project
A15BT
Bridging transformer matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels (Male XLR to female XLR). Features 33 kOhm primary: 600 or 7500 ohm secondary may be used in reverse Balanced connections easily switchable to unbalanced Slender...
BrandShure Product TypeBridging Transformer
Sign up
Available:Backorder
Add to Project
A15HP
Balanced XLR in-line high pass filter that reduces low frequencies below 100 Hz. Features Rolls Off Low-Audio Frequencies Reduces 60 Hz Electrical Hum
BrandShure Product TypeIn-Line High Pass Filter
Sign up
Available:Backorder
Add to Project
A15PRS
Switchable phase reverser reverses the polarity of a balanced audio signal, corrects polarity reversal from wiring errors, and reduces comb filtering. Features Reverses polarity of pins 2 and 3 of a balanced line Slender, in-line XLR (F) to XLR (M) configuration may be used in reverse...
BrandShure Product TypeSwitchable Phase Reverser
Sign up
Available:Backorder
Add to Project
A15TG
Battery-powered 700 Hz tone generator that troubleshoots audio systems by checking microphone lines for correct patching and detecting unusual noise. Features The A15TG includes a recessed On-Off switch and a three-pin XLR audio connector Removable end cap allows for easy battery...
BrandShure Product TypeTone Generator
Sign up
Available:Backorder
Add to Project
A2-7302
Provides 8-In/8-Out AES3 Stereo Channels on XLRs from CM-AUD-8IN-8OUT
BrandtvONE Product TypeAudio Format Converter
Sign up
Available:Backorder
Add to Project
A2-7322
Provides 8-In/8-Out Analog Stereo Channels (Bal or Unbal) on Terminals from CM-AUD-8IN-8OUT.
BrandtvONE Product TypeAudio Format Converter
Sign up
2,90505
Available:Backorder
Add to Project
A2-7342
Provides 4-In/4-Out Analog Stereo Channels on XLRs from CM-AUD-8IN-8OUT
BrandtvONE Product TypeAudio Format Converter
Sign up
1,88855
Available:Backorder
Add to Project
A85F
The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder. Features Provides 24 dB of gain May be used in reverse XLR and 1/4" connectors
BrandShure Product TypeLine Matching Transformer
Sign up
Available:Backorder
Add to Project
A95U
Reversible transformer matches low- or high-impedance microphones to high- or low-impedance inputs. The transformer permits use of very long microphone cables with either low- or high-impedance microphones. Features The transformer permits use of very long microphone cables with either...
BrandShure Product TypeLine Matching Transformer
Sign up
Available:Backorder
Add to Project
Show another 20 products
Product filters
Brand
Product Type